PAHT-CF Carbon Fiber Reinforced Nylon Blend
Tough, carbon fiber reinforced nylon blend for functional parts exposed to heat and moisture. Lower water absorption than PA6-based nylon helps retain mechanical properties in humid environments.
High toughness
Lower moisture absorption
Strong layer adhesion
Technical specifications
PAHT-CF combines PA12 and other long-chain polyamides with carbon fiber. It offers high toughness, strong layer adhesion, and low moisture absorption for demanding functional parts. It can be used in high temperature environments, up to 170c.
SUPPORTED TECHNOLOGIES
FDM 3D Printing
| Property | Value |
|---|---|
| Density | 1.06 g/cm³ |
| Elongation at break | 8.4 % |
| Heat deflection temperature | 170 °C |
| Shore hardness | 85 D |
| Applicable presets | Functional / mechanical, Solid |
| Available colors | Black |
| Max printing volume | 315 x 315 x 315 mm |
PAHT-CF pros
Heat deflection temperature up to 170c
High tensile strength
Carbon fiber reinforced
PAHT-CF cons
Still absorbs some moisture
Annealing is recommended
Professional PAHT-CF 3D printing service
Order PAHT-CF 3D printed parts using our online 3D printing quotation tool.
Order your PAHT-CF parts
Ready to engineer
your solution?
your solution?
Visit our online quoting system to
estimate your parts in minutes.
Start your order
estimate your parts in minutes.